Installing MAC 1 5/8 headers on a 94 Z28
Russell Valve Cover Breather
BMR Subframe Connectors
BMR Rear Control arms with urethane bushings
Installation and tuning of NOS dry kit 5176
Install a LSD in a V6 F-body
LT4 Knock Module
Photo Radar Sucks
94 3.4L V6 Camaro Page
(no longer have it / replaced by Z28 ) |
Listed here are a few old engine combo's I have run.
Each step was an evolution, peaking with my 401ci motor that made nearly 500
streetable RWHP, all mota'! I met all my NA goals(10s and 130mph traps) so I moved
on to tackling the turbo project.... NA engine
stuff-
Borla catback (full block off plate)
Custom 4" cold air intake
Hooker long tubes
Custom dual cat y-pipe and dual off-road pipes
NOS pro fogger direct port nitrous kit (1st stage)
Custom NX nozzle based 2nd stage
Accell AFPR
255lph intank pump
Front mounted Jaz 1 gallon cell
Holley blue fuel pump
BG 2 port regulator
 -Engine mods
Old Motor (401ci)-
Callies 4340 Stealth forged crank
Clevite 77 HX bearings
Callies 4 bolt splayed main caps
Callies 4340 forged I-beam rods
Custom BME pistons with trick custom oil ring support pin buttons
BME wrist pins
Speedpro rings
ARP main studs
ARP oil pump stud
ARP rod bolts
AFR cyl heads, ported by Me
LT4 intake manifold, ported by Me
Custom Cam Motion solid roller cam
Comp Cams #954 valve springs
Manely +.200 chromemoly push rods
Summit brand "cheapies" non-self aligning 7/16th 1.6 roller rockers
AFR guide plates
ARP 7/16th rocker studs
AFR Ti retainers
Cloyes true double roller timing chain
Miezer electric waterpump
Converted to 95+ vented opti
AS&M monoblade TB
Oldest Motor (383ci)-
Cola 4340 "4hole" forged crank
Clevite 77 H bearings
Callies 4bolt main splayes
Eagle 4340 forged H-beam rods
JE/SRP forged pistons
Speedpro rings
ARP fastners |
